ClickCease

Car Speakers

Filter Results
Search
1 - 20 of 24
Sort by: 
    • Nominal Diameter 4 inch
    • Nominal Impedance 4 OHM
    • RMS Power Handling 50 Watts
    • Maximum Power Handling 150 Watts
    • Sensitivity 89 dB
    • Frequency Response 115 HZ - 20KHz
    • Recommended HI Pass Crossover 120Hz
    • Voice Coil Diameter 1 inch
    • Voice Coil Former Material KSV
    • Winding Material Copper Wire
    • Cone Material Injection
    • Surround Material Rubber
    • Basket Material Metal
    • Magnet Material Ferrite
    • Magnet Weight 11 Oz
    • Perfect blend of leading innovations and superior workmanship
    • Manufactured to offer high value and everlasting reliability
    • Strict quality control ensures conformance to safety standards
    • (2) HYDRO 4" 300W Marine Towers
    • Documentations
    • High performance audio upgrade that delivers signature quality sound that goes beyond OEM factory systems
    • Marine certified with IP65 rating (water- and dirt-resistant) and tested for salt-fog, UV and humidity
    • Polypropylene and UV tolerant cone with waterproof inner and outer surrounds
    • Simple drop-in installation for any vehicle including cars, boats, ATVs—you name it
    • Zero tweeter protrusion and reduced mounting depth for a precise fit
    • Dynamic Balance technology offers a rich, clean, full-range sound
    • ¾”, 20mm Tweeter ensures clear, balanced mids and highs
    • 75 Watts at Continuous Power; 225 Watts at Peak Power
    • The Pro M series was designed to give you amazingly loud volume for your midrange frequencies.
    • Large ferrite magnet that helps the CCA coil take gobs of power punching out pure pro-audio vocals at the highest volume on demand.
    • Durable DS18 design that will not only deliver amazing sound quality and volume but have great durability throughout the years to come with high strength cloth surrounds and paper pressed cones.
      • PRO-X 6.5 inch Mid-Range Loudspeaker 450 Watts 8-Ohm (1 Speaker)
      • Documentation
      • High performance audio upgrade that delivers signature quality sound that goes beyond OEM factory systems
      • Marine certified with IP65 rating (water- and dirt-resistant) and tested for salt-fog, UV and humidity
      • Polypropylene and UV tolerant cone with waterproof inner and outer surrounds
      • Simple drop-in installation for any vehicle including cars, boats, ATVs—you name it
      • Zero tweeter protrusion and reduced mounting depth for a precise fit
      • Dynamic Balance technology offers a rich, clean, full-range sound
      • ¾” & ½’, 20mm & 13mm tweeter and midrange ensures clear, balanced mids and highs
      • 100 Watts at Continuous Power; 300 Watts at Peak Power
      • High performance audio upgrade that delivers signature quality sound that goes beyond OEM factory systems
      • Marine certified with IP65 rating (water- and dirt-resistant) and tested for salt-fog, UV and humidity
      • Polypropylene and UV tolerant cone with waterproof inner and outer surrounds
      • Simple drop-in installation for any vehicle including cars, boats, ATVs—you name it
      • Zero tweeter protrusion and reduced mounting depth for a precise fit
      • Dynamic Balance technology offers a rich, clean, full-range sound
      • ¾”, 20mm Tweeter ensures clear, balanced mids and highs
      • 50 Watts at Continuous Power; 150 Watts at Peak Power
      • Two 2-way speakers
      • Two 12" Lengths of speaker wire (tinned wire on one end and female quick slides on the other)
      • 4 Red plastic butt connectors
      • Eight 1" Screws
      • 8 Speed clips
      • Owner's manual
      • Online registration information
      • High performance audio upgrade that delivers signature quality sound that goes beyond OEM factory systems
      • Marine certified with IP65 rating (water- and dirt-resistant) and tested for salt-fog, UV and humidity
      • Polypropylene and UV tolerant cone with waterproof inner and outer surrounds
      • Simple drop-in installation for any vehicle including cars, boats, ATVs—you name it
      • Zero tweeter protrusion and reduced mounting depth for a precise fit
      • Dynamic Balance technology offers a rich, clean, full-range sound
      • ¾”, 20mm Tweeter ensures clear, balanced mids and highs
      • 100 Watts at Continuous Power; 300 Watts at Peak Power
      • Two 2-way speakers
      • 2 Grilles
      • 2 Mounting brackets (includes GM/Chrysler)
      • Two 12" Lengths of speaker wire (tinned wire on one end and female quick slides on the other)
      • 4 Red plastic butt connectors
      • Eight 1" Screws
      • 8 Speed clips
      • Owner's manual
      • Online registration information
      • 2-way car speakers (pair)
      • 6-1/2" polypropylene woofer cone w/ polyurethane surround
      • handles up to 50 watts RMS (100 watts peak power)
      • top-mount depth: 2-1/4" / Grilles Included
        • Two 2-way speakers
        • Two 12" Speaker leads (quick slides on one end and crimp connectors on the other)
        • 2 Grilles
        • Eight 1-3/8" Screws
        • 8 Speed clips
        • Template
        • Warranty information
        • High performance audio upgrade that delivers signature quality sound that goes beyond OEM factory systems
        • Marine certified with IP65 rating (water- and dirt-resistant) and tested for salt-fog, UV and humidity
        • Polypropylene and UV tolerant cone with waterproof inner and outer surrounds
        • Simple drop-in installation for any vehicle including cars, boats, ATVs—you name it
        • Zero tweeter protrusion and reduced mounting depth for a precise fit
        • Dynamic Balance technology offers a rich, clean, full-range sound
        • ¾”, 20mm Tweeter ensures clear, balanced mids and highs
        • 45 Watts at Continuous Power; 135 Watts at Peak Power
        • Two 2-way speakers
        • 2 Grilles
        • Two 12" Lengths of speaker wire (tinned wire on one end and female quick slides on the other)
        • 4 Red plastic butt connectors
        • Eight 1" Screws
        • 8 Speed clips
        • Owner's manual
        • Online registration information
        • Transducer: 4 x 75mm
        • Rated Power: 4 x 20 Watts
        • Frequency Response: 120 - 20KHz
        • Full-Range RCA Auxiliary Input and Output Capable
        • Bluetooth Vesion: 4.2
        • USB Charging: 5V(1A)
        • Fuse Rating: 10A
        • All in One Amplified Bluetooth Audio System
        • Easy To Install
        • CRUISE X Amplified Handle-bar Speakers
        • Instructions
        • Unique coaxial design with concave recessed tweeter.
        • 3 ohm voice coil to help maximize power from amps.
        • Glass fiber cone for great looks and high durability while keeping a high sensitivity.
          • 300 Watts Max. Power
          • Injected Molded Polypropylene™ (IMPP) composite Cone Woofer
          • Patented Pioneer P.F.S.S Spider
          • 1-3/16" Balanced Dome Tweeter
            • 6 1/2" 2-Way Coaxial Speaker
            • Documentation
            • 1" polypropylene dome tweeters (pair)
            • Flush- and surface-mount hardware included
            • External crossovers included
            • Handles up to 50 watts RMS (100 watts peak power)
            • Frequency response: 3200-20,000 Hz
            • Sensitivity: 87 dB
            • Top-mount depth: 7/8"
            • 2 Tweeters (with attached 16" wire terminated with quick-slide connectors)
            • 2 Crossovers
            • 2 Adhesive backed Memphis Audio logos (packaged with the crossovers)
            • 2 Flush mount housings (with tweeters installed)
            • 2 Flush mount retaining rings
            • 2 Angled surface mount housings
            • Four 3/4" Flat-head screws
            • Tweeter installation instructions
            • Fully modular mounting design with included hardware.
            • Each new design give the tweeter a fresh look.
            • 200w peak and 50w AES power handling so not a lot of power is required.
            • 1" aluminum CCA voice coil with Neodymium magnet structure.
              • PRO 1" Vc Surface/Flush/Angle Aluminum High Compression Neodymium Super Bullet Tweeter 200 Watts 4-Ohm
              • Documentations
              • Durable and lightweight / High-efficiency, quick response
              • Sensitive enough to sound great w/ a factory audio system
              • Polyurethane Surround / Polypropylene Cone
              • RMS Peak: 120W, Mounting Depth: 3"
                • Two 3-way speakers
                • Two 12" Speaker leads
                • 2 Grilles
                • Eight 1-3/8" Screws
                • 8 Speed clips
                • Template
                • Warranty information
                • Component speaker system includes two 6-3/4" woofers, 2 tweeters, 2 external crossovers
                • Polypropylene woofer with polyurethane surround
                • Separate polypropylene dome tweeter
                • 2-way external crossover
                • Handles up to 50 watts RMS (100 watts peak power)
                • Frequency response: 72-20,000 Hz
                • Sensitivity: 88 dB
                • Woofer mounting depth: 2-1/2"
                • Woofer grilles included
                • 2 Woofers
                • 2 Tweeters (with attached 16" wire terminated with quick-slide connectors)
                • 2 Crossovers
                • 2 Adhesive backed Memphis Audio logos (packaged with the crossovers)
                • 2 Woofer grilles
                • 2 Flush mount housings (with tweeters installed)
                • 2 Flush mount retaining rings
                • 2 Angled surface mount housings
                • Two 6' Crossover input wires (tinned bare wire on both ends)
                • Two 12' Tweeter wires (quick slides on one end and tinned bare wire on the other)
                • Two 12' Woofer wires (quick slides on one end and tinned bare wire on the other)
                • Eight 1-3/8" Pan head screws
                • 8 Speed clips
                • Four 3/4" Flat-head screws
                • Tweeter installation instructions
                • Template
                • 5x7" 2-Way Speakers (pair)
                • Graphite-Reinforced Polypropylene Woofer Cone with Polyurethane Surround
                • 80 Watts Peak Power
                • 40 Watts RMS
                • PEI Dome Tweeter
                • Sensitivity: 88 dB
                • Frequency Response: 87Hz - 20kHz
                • Top-Mount Depth: 2-1/8"
                • 2 x 2-way speakers
                • 2 x 12" Speaker leads (quick slides on one end and crimp connectors on the other)
                • 8 x 1" Screws
                • 8 x Speed clips
                • Template
                • Warranty information
                • Plus One cones provide more overall speaker-cone area
                • Adjustable tweeter output level
                • Acoustically damped, UV-resistant polypropylene cone
                • Large magnet delivers higher power handling
                • Starfish Tweeter Mounting Adapter
                • I-Mount Tweeter Mounting Kit
                  • 2 x Speakers
                  • 2 x Grilles
                  • 2 x Plastic multi-hole adapter rings
                  • 1 x Foam gasket
                  • 2 x Crossovers
                  • 2 x Tweeters
                  • 2 x Flush-mount cups
                  • 2 x Threaded flush-mount adapters
                  • 2 x Surface-mount cups
                  • 2 x Starfish tweeter mounts
                  • 2 x Plastics locking nuts
                  • 30 x Screws
                  • 8 x Speed clips
                  • 2 x Spacers
                  • 2 x Washers
                  • Bullet resonator that extends your speakers frequency a great deal.
                  • Sturdy basket design for high strength and durability.
                  • High efficiency voice coils to ensure long lasting loud playtime.
                    • PRO-X 6.5" Mid-Range Loudspeaker with Bullet 500 Watts 4-Ohm
                    • Documentation
                    • Multi-color LED light rings
                    • Polypropylene woofers with rubber surrounds
                    • Power range: 2-50W RMS / 100W peak power
                    • Mounting depth: 2-1/2"
                      • MXA60L 6-1/2" 2-Way 100W Powersports Speakers w/ LED Lights (Pair)
                      • Documentation
                      • 12" subwoofer with dual 2-ohm voice coils
                      • Rigid paper cone with double-stitched foam surround
                      • Vented die-cast aluminum basket
                      • Designed for high SPL performance
                      • Can be wired for 1-ohm or 4-ohm impedance
                      • Power handling: 750 watts RMS (1500 watts peak)
                      • Sensitivity: 85.15 dB
                      • Mounting depth: 6.23"
                      • Cutout diameter: 11.34"
                      • Memphis Audio MOJO Pro Series 12" Component Subwoofer
                      • Documentation
                    ×
                    ×

                    Validating Credit Card...

                    It will not be processed until the offer is accepted by a merchant.

                    Notifying Retailers...

                    Notifying our merchants and checking to see if they accept this offer.

                    Offer Submitted!

                    ×
                    3-digit code in the back of your credit card
                    ×
                    ×
                    ×
                    ×