audio-technica AT2035 Studio Microphone Pack with ATH-M20x, Boom & XLR Cable
Model: AT2035PK
- You name the price you want to pay for a product.
- If the retailer likes your offer, you get that price for the product.
- Guaranteed Brand New Products
- All Products Sold by Manufacturer Authorized Retailers
- 30 Day Return Policy
-
Free Shipping
No Additional Fees
Physical
Weight | 6.7 oz / 190 g |
Packaging Info
Box Dimensions (LxWxH) | 11.7 x 10.2 x 2.9" |
Box Dimensions (LxWxH) | 9.8 x 9.6 x 3.0" |
Headphone
Voice Coil | Copper-Clad Aluminum Wire |
Magnet Type | Neodymium |
Driver Size | 1.6" / 40 mm |
Earcup Style | Open-Back |
Design | Over-Ear (Circumaural) |
General
Diameter | 2.05" / 52.0 mm |
Output Connectors | 1 x 3-Pin XLR |
Operating Current Consumption | 3.8 µA |
Operating Voltage | 11 to 52 V |
Length | 6.69" / 170.0 mm |
Weight | 14.22 oz / 403 g |
Frequency Response | 15 Hz to 20 kHz |
Sensitivity | 96 dB |
Impedance | 47 Ohms |
Maximum Power Handling | 700 mW |
Connectivity
Adapter (Included) | 1/4" (6.3 mm) |
Audio Connector | 1/8" (3.5 mm) |
Cable
Cable Length | 9.8' / 2.99 m |
Analog Performance
Maximum SPL | 148 dB SPL |
Equivalent Noise Level | 12 dB |
Signal to Noise Ratio | 80 dB |
Sensitivity | 22.4 mV/Pa |
Impedance | 120 Ohms |
Dynamic Range | 136 dB |
Frequency Range | 20 Hz to 20 kHz |
Polar Pattern | Cardioid |
Transducer | Condenser |
Low-Cut Filter | 12 dB/Octave @ 80 Hz |
THD | 1% |
Pad | -10 dB |
The AT2035 has good features for the price, sturdy construction and a fairly flat, clear sound. On the right vocalist it sounds great, but it will not suit all types of singers.
-
+
Useful feature set Solid construction Warm, clear reproduction Looks classy Good value for money
-
-
Bass response overpowering for some vocalists Not quite as versatile as some users claim
So far the AT2035 is working as advertised. Used it for live recording as well as home studio. Crystal clear almost too much but an improvement on my old MXL that has been upgraded.I'm recording Banjo, Dobro which mic placement plus additional located mic is key to success.
I love this mic. Running through a Scarlett 2i2. Good clean sound! Glad I bought it!
Great sounding condenser microphone. I was very impressed with not only the overall sound of the unit but also the quality of materials used in the manufacture of the mic. When I get ready to buy some more microphones; I will seriously consider moving up to the next level of Audio Technia mic...
Overall I think it's a good microphone. I noticed however, whenever I sang lower notes (below E4 - E above middle C), it sounds boomy, and it gets even worse when I play the CD in my car (even when the High Pass Filter switch is on).
I work on a few different podcasts and I record a lot of my own music and this mic is a TREMENDOUS help! Great quality
This microphone has a solid metal build that feels like it can take a beating, it's low noise, the omni- derectional response is great, I barely hear background noise(keep gain low) in very unideal rooms.
Purchase for O/H on drums in live setting. Working better than expected. Clean full sound without much bleed.
For the price I cannot believe the performance. Smooth response and - very important - low self-noise. The AT2035 compares favorably to other more expensive mics in our fleet (Heil PR40, Sennheiser 421) and outperforms others in its price range.
I bought this mic to record vocals for rap/hip-hop/alternative music in my home studio. With the proper recording environment and mixing techniques this mic can produce near-industry standard recordings.
This microphone really captures the lows in my voice and sounds as professional as a Neumann 87..... Also, at a fraction of the price compared to the Neumann 87!! Great price for a quality condenser microphone!!! I use this microphone for the voice over industry.
- Includes AT2035 Cardioid Microphone
- 80 Hz High-Pass Filter
- 20 Hz to 20 kHz Frequency Response
- 148 dB SPL Handling
- Includes ATH-M20x Monitor Headphones
- Circumaural Design
- 40mm Neodymium Drivers
- 15 Hz to 20 kHz Frequency Response
- 9.8' Cable
- Includes Boom and XLR Cable